How to Make Your Own DIY Dreamcatcher

How to Make Your DIY Dreamcatcher

Once you’ve gathered all your materials, carve out a few hours to have some serious DIY crafting fun! Follow the steps and photo tutorial below to make your very own dreamcatcher:

1. Wrapping the Hoop

• Find a starting point and begin wrapping the hoop with your ribbon
• If you run out of ribbon, or you want to change color, add a tiny drop of hot glue and continue wrapping
• Finish wrapping the hoop by securing the ribbon’s end with a hot glue gun

2. How to Weave the Dreamcatcher

• Decide where the top of the dreamcatcher will be and tie a secure knot with your hemp cord
• About a finger’s length away from the first knot, wrap the hemp cord underneath the hoop and loop it through
• Continue wrapping the hemp cord like this for the entire circumference of the hoop

• Tie the next knot on the hoop centered between the first two knots, so it will loop around the center of the first row of hemp cord. (Take your time, this part can be a bit confusing)

• Continue this knot pattern, slowly making the webbing smaller as you move towards the center of the hoop
• To finish the webbing, simply end on a knot where the webbing looks complete
• Make sure you pull the hemp cord tight, and double or triple tie the final knot. Trim the remaining hemp cord

3. How to Decorate Your Dreamcatcher

• Cut your leather cord or ribbon to about 8 inches
• Take the leather cord and tie a knot at the bottom of the dream catcher. To keep the leather cord secure, place a tiny drop of hot glue on top of the knot

• String beads onto your cord or ribbon as desired and make a knot under the bead to keep it in place
• Pro Tip: Some cord will be wide enough you don’t need to knot it. If this is the case, use one knot under the last bead to be safe

4. Adding Flair

• Measure 2-3 feet of string
• Take two feathers and tie a knot about one inch from the end of each quill, wrap the string around each quill a few times, and leave a piece of string hanging out

• String a bell or bead (or both!) onto the piece of thread string that is left over, tying a knot to secure the bell or bead in place
• Decide where you want the feather to hang on your dreamcatcher, then tie it and trim the extra string
• Keep adding as many feathers, beads, and bells as you want until your dreamcatcher is complete!

5. How to Hang Your Dreamcatcher

• Cut a piece of ribbon long enough to hang your dreamcatcher, and tie a knot at the top of the hoop
• Add a drop of hot glue to the knot, and then tie another knot (be mindful of the hot glue!)
• Trim the ends of the leather cord or ribbon

You Just Created Your Very Own DIY Dreamcatcher!

Congratulations!! You just created your very own dreamcatcher. It’s beautiful, it’s meaningful, and it’s uniquely y.o.u.

Now you get to find a special place to hang your beautiful creation. Where will you hang your DIY dreamcatcher to obliterate those bad vibes? Give yourself a pat on the back and enjoy the good vibes of your DIY dreamcatcher.